2.1. Important Safety Information

23 last updated: 5 months ago


· Caution! Exercise common sense and your best judgement while operating Brewie+.

· Caution! Risk of injury! Supervise Brewie+ carefully if children are present.

· Caution! Do not tilt the machine! It might damage your Brewie+.

· Caution! Keep the display dry under any circumstances - do not use it with wet hands, since it might damage the display!

· Caution! If your Brewie+ has dust on its side(s) (near the logo), please, vacuum-clean it!


· Caution! For brewing and cleaning only use clean drinking water!

· Caution! Risk of electric shock! Risk of fire! Do not operate Brewie+ with any damaged part, such as a frayed cord or broken plug.

· Caution! Risk of electric shock! Risk of equipment damage! Test the ground fault circuit interrupt breaker for the circuit Brewie is on regularly, and ensure that the electrical wiring conforms with local safety regulations.

· Caution! Hot! Brewie+'s surface can get extremely hot during the brewing cycle. Handle Brewie+, hoses, and other tools with care.

· Caution! Hot liquid! After choosing manual water addition, always and only add water when Brewie+ instructs you to, in the precise amount you are instructed to.

· Caution! Hot liquid! Risk of equipment damage! Do not remove water hoses while Brewie+ is in operation.

· Caution! Hot liquid! Keep all lids closed unless you are manually adding ingredients at Brewie+'s instructions.

· Caution! Hot liquid! Risk of equipment damage! Do not remove the Brewie bag or the hop cages unless Brewie+ is paused or the brewing cycle is complete.

· Caution! Hot! The Brewie bag and the hop cages may be hot when removing them from the machine. Handle with care.

· Caution! Hot! Risk of spoiling the brew! After choosing automatic water addition, do not disturb Brewie+ while water is being cycled in or out of the machine. Disturbances can cause the weight sensor to report false data.

· Caution! Please make sure that the water tap is open during the whole brewing process. In case you close the tap before your brew is finished you will not have sparging nor cooling.


· Caution! Risk of electric shock! Risk of equipment damage! Do not immerse or soak the machine.

· Caution! Risk of infection! Clean Brewie+ after each use.


Please clean the machine regularly. Cleaning not only ensures the sterile brewing conditions but also removes all the contamination that shortens the lifetime of the machine.

· Caution! Hot! Allow machine to fully cool before removing, replacing, cleaning, or servicing any part.

· Caution! Risk of electric shock! Risk of equipment damage! Do not disassemble the Brewie+. There are no user serviceable parts inside.

· For Indoor Use Only.
· The appliance is only to be installed in locations where its use and maintenance is restricted to trained personnel.
· The appliance must not be cleaned by a water jet.
· The appliance has to be kept in a horizontal position whether in use or not.

We advise you to use sanitizers and detergents provided by Brewie. Only use food grade chemicals when cleaning the machine or any fermentation equipment. When working with chemicals the use of protective gloves and glasses is recommended. Do not use brush or abrasive clothes to clean the cover of Brewie+ since it might damage
the surface.

Only use food grade beer brewing ingredients in the machine, except when an official program instructs otherwise. Make sure that the ingredients are not expired and not contaminated. If expired, contaminated or non-food grade ingredients have been added to the machine, make sure that it has been thoroughly cleaned. Make sure that dry matter cannot be washed out from the hop cages and Standard Brewie Bags as even a small amount can clog the pumps or valves. If dry matter is placed outside of the hop cages or Standard Brewie Bags, make sure that it’s dissolvable in cold water in order to prevent clogging.

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connected the equipment into an outlet on a different circuit from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Newity Kft. — 13/a Kiralyi Pal St., 1053 Budapest, Hungary

Have you found this article useful?

Then press “Cheers” to help us provide relevant content for you!